Fiber concrete (fiber reinforced concrete) is concrete with short fibers mixed in. The fibers reduce shrinkage cracks and improve impact resistance. You can make fiber concrete yourself: take a regular 25 kg bag of dry concrete mix and add fiber while mixing. Below you can see how much fiber one bag needs and what it costs.
Fiber concrete cost per 25 kg bag
One 25 kg bag of dry concrete mix needs about 11 g of PP fiber. That costs about €0.15.
| PP fiber pack | Price | Enough for | Fiber per bag |
|---|---|---|---|
| 150 g | €5.00 | ≈ 13 bags | ≈ €0.38 |
| 600 g | €8.00 | ≈ 53 bags | ≈ €0.15 |
| 900 g | €11.50 | ≈ 80 bags (1 m³) | ≈ €0.14 |
A 25 kg bag of DIY fiber concrete = a 25 kg bag of dry concrete mix + about €0.15 of fiber.
Regular dry concrete mix costs about €4–6 per 25 kg bag in Estonian building stores (November 2026). With fiber, a bag comes to about €4.15–6.15. For the exact price, add €0.15 to the dry mix price at your store.
Example for a whole job: a 20 m² floor screed 5 cm thick is 1 m³ of concrete, or 80 bags of dry mix. It takes one 900 g pack of fiber: €11.50 for the whole floor, or about €0.58 per square metre.
Order PP microfiber 12 mm for floor screed – for plaster and thin layers, use PP microfiber 6 mm. Current prices are on the product pages.
How to make fiber concrete yourself
- Pour 2/3 of the water into the mixer.
- Add about 11 g of PP fiber per 25 kg bag.
- Add the dry concrete mix.
- Add the rest of the water and mix for at least 3 minutes.
This way the fiber spreads evenly and does not clump. Wear safety glasses and a dust mask when opening the pack and measuring the fiber.
How much fiber you need
Calculation: 1 m³ of concrete takes about 2000 kg of dry mix, which is 80 bags. Fiber dosage is given in kilograms per 1 m³:
| Fiber | Per 1 m³ | Per 25 kg bag | Cost per bag |
|---|---|---|---|
| PP microfiber 6 mm and 12 mm | ≈ 0.9 kg | ≈ 11 g | ≈ €0.14 |
| PP mesh fiber 20 mm | ≈ 1.2 kg | ≈ 15 g | ≈ €0.19 |
| PVA microfiber 20 mm | ≈ 1.5 kg | ≈ 19 g | ≈ €0.65 |
Cost per bag is based on the 900 g pack price.

When you mix it yourself, you choose the fiber type and amount for the job. The calculator works out the quantities for your project.
Which fiber to choose
| Fiber | Use | Product |
|---|---|---|
| Polypropylene (PP) microfiber 6 mm | plaster, facades, self-levelling screed, thin layers | PPMIF06 |
| Polypropylene (PP) microfiber 12 mm | floor screed, concrete slabs, foundations, walls | PPMIF12 |
| PP mesh fiber 20 mm | garage, warehouse and industrial floors, outdoor pours | PPMEF20 |
| PVA microfiber 20 mm | loaded floors, high-strength concrete | PVAMIF20 |
For more on choosing the fiber type, see PP, PVA, or basalt fiber.
What fiber does in concrete
Fresh concrete shrinks in the first hours as water evaporates from the surface. If the shrinkage is restrained, hairline cracks appear on the surface. Fibers take up these stresses before the concrete has gained strength. Read more in Shrinkage cracks in concrete.
Fiber concrete is most useful in floor screeds, concrete slabs, garages, driveways, foundations and repairs. Fiber does not need to be laid like mesh, so it also works for pours over underfloor heating pipes.
Does fiber concrete replace rebar?
PP fiber does not replace designed structural reinforcement. It controls shrinkage cracking but does not carry structural loads. For load-bearing structures, the structural engineer always decides on the reinforcement.
In light, non-load-bearing work, such as floor screeds or ground-bearing floors without large point loads, fiber often replaces anti-shrinkage mesh. Read the comparison: Mesh or fiber for floor screed.
Making planters or garden pavers? How much fiber to add to a small batch: DIY concrete planters without cracks.
FAQ
How much fiber per 25 kg bag of dry concrete mix? About 11 g of PP microfiber 6 mm or 12 mm, about 15 g of PP mesh fiber 20 mm, and about 19 g of PVA microfiber 20 mm.
Are fiber concrete and fiber reinforced concrete the same thing? Yes. Both names mean concrete with fibers mixed in. The fiber can be polypropylene, PVA, basalt or steel.
Can fiber be added to ready-mix concrete from a plant? Yes. The fiber is added to the mixer drum and mixed until even before pouring. Agree on this with your concrete supplier in advance. Quantity: about 0.9 kg of PP fiber per 1 m³.
Summary
- A 25 kg bag of dry concrete mix needs about 11 g of PP fiber, which costs about €0.15 (≈ €0.38 from a 150 g pack).
- A bag of DIY fiber concrete = a bag of dry mix + about €0.15, so roughly €4.15–6.15 per bag.
- A 20 m² screed 5 cm thick = 1 m³ = 80 bags and one 900 g pack of fiber: €11.50, or about €0.58 per m².
- PP fiber does not replace designed structural reinforcement.
- The calculator gives exact quantities, and answers to common questions are in the FAQ.
